The F11 error code on your Hisense dishwasher indicates a drainage issue. This means the dishwasher is having trouble removing water during the cycle.
Let’s go through some simple steps to identify and fix the problem.
Possible Causes:
- Clogged drain: Food scraps, debris, or even foreign objects can block the drain system, preventing water from flowing out.
- Loose connections: Electrical connections to the drain pump might be loose, causing malfunctions.
- Faulty drain pump: In rare cases, the drain pump itself might be malfunctioning.
Resolving The F11 Error Code on Your Hisense Dishwasher: Troubleshooting steps
- Check for blockages.
- Inspect the drain filter, drain hose, and pump for any clogs. Clear away any debris you find.
- Make sure the drain hose isn’t kinked or bent, as this can restrict water flow.
- Verify connections.
- Look for any loose or damaged wires around the drain pump.
- Ensure the yellow locking plug on the drain hose is securely fastened.
- Test the drain pump.
- If you’re comfortable with a multimeter, you can measure the drain pump’s resistance and compare it to the expected values listed in the guide (typically around 34 ohms for 120V and 190 ohms for 220V). A reading outside of this range suggests a faulty pump.
If none of these steps resolve the F11 error, it’s recommended to consult a qualified appliance repair person to diagnose and potentially replace the main board.
By the way,
- Regularly clean the drain filter to prevent future clogs.
- Avoid putting excessive food scraps or debris in the dishwasher.
By following these steps, you should be able to identify and fix the cause of the F11 error code and get your Hisense dishwasher draining properly again.
