Electrolux Dishwasher i10 Error Code Solutions

If you’ve ever been met with the frustrating sight of an “i10” error code flashing on your Electrolux dishwasher, you’re in the right place. In this blog post, we’ll be talking about the Electrolux dishwasher i10 error code, along with its close companion, the i11 fault code. We’ll explain what these codes mean, what might be causing them, and, most importantly, how to troubleshoot and fix them effectively.

Electrolux Dishwasher i10 Error Code Solutions

Stick with us as we explore how to fix the Electrolux dishwasher i10 error code!

Understanding the Electrolux Dishwasher i10 Error Code (or i11) and How to Fix It

The i10 error code on your Electrolux dishwasher, sometimes shown as the i11 fault code, usually points to an issue with the water inlet valve. In simpler terms, it means the dishwasher is having trouble getting enough water. In more technical terms, it stands for “Water Tap Closed Error.” This error pops up when the dishwasher detects a problem with water flow right at the beginning of the cycle, particularly during the initial water filling stage.

It’s like your dishwasher’s way of saying, “Hey, I need water to proceed with my job! So, if you’re seeing this code, it’s time to look into why the water isn’t flowing in as it should.

Error codeMeaning
i10The water fill valve error or water tap closed error occurred during static filling.
i11The water fill valve error or water tap closed error occurred during dynamic filling
Understanding the Electrolux Dishwasher i10 Error (or i11)

Electrolux Dishwasher i10 Error Code: Common Causes

Let’s break down the various factors that can contribute to the i10 error code on your Electrolux dishwasher:

  • This error happens when the water tap is closed or not opened completely before starting the dishwasher. It’s a common trigger for the i10 error.
i10 Error Code The water tap being closed
  • If your water supply doesn’t provide sufficient pressure, the dishwasher may struggle to fill properly. This can be a factor if you live in an area with low water pressure.
  • Over time, if the filter in the dishwasher gets clogged with debris, it can restrict the water flow into the dishwasher, leading to the i10 error.
  • If the wiring connected to the inlet valve is damaged or loose, it can disrupt the communication between the dishwasher and the valve, causing an i10 error code.
i10 Error Code Faulty Electrical Wiring
  • The inlet valve itself may be defective, preventing it from opening fully or at the right time to allow water into the dishwasher. This would also trigger the i10 error.
  • Sometimes, a faulty flowmeter can lead to the i10 error. This component measures water flow, and if it fails to generate the necessary pulse when water passes through its turbine, the dishwasher may not detect water flow properly.
  • If the drain hose is positioned below the recommended height, it can cause continuous drainage of water from the dishwasher, resulting in the i10 error.
i10 Error Code drain hose is positioned below the recommended height
  • If the pressure sensor itself is faulty or its associated component, such as a hose, is blocked, bent, or leaking, it can result in inaccurate water level readings and trigger the i10 error.
  • If the main board is faulty, it can cause various errors, including the i10 code.

Fixing the Electrolux Dishwasher i10 Error Code: Troubleshooting Solutions

If you encounter the i10 fault code on your Electrolux dishwasher, follow these troubleshooting steps to resolve the issue:

  • Ensure that the water tap supplying your dishwasher is fully open. Sometimes, this error occurs simply because the tap is closed or not opened completely before starting the dishwasher.
  • If you live in an area with known low water pressure, consider installing a booster pump to ensure an adequate water supply for your dishwasher. Good water pressure is crucial for proper filling, so this can be a key factor in preventing the i10 fault code.
  • Make sure to regularly clean the appliance’s filter to avoid it getting clogged with debris over time. A clogged filter can restrict water flow, leading to the i10 error.
i10 Error Code Clean the filter
  • Check the wiring connected to the inlet valve. If you find any damaged wires, repair or replace them as needed. A properly functioning wire harness ensures communication between the main board and the valve.
  • If you suspect a faulty inlet valve, perform a resistance check on the solenoid valve. For 120 Vac, the ohmic reading should fall between 0.9 and 1.1 KΩ, while for 220 Vac water valves, it should be within the range of 2.8 to 3.3 KΩ. If the resistance reading is infinite, this indicates a faulty water valve, and you should replace it accordingly.
i10 Error Code Measure the resistance of the water valve solenoid
  • If you suspect a faulty flowmeter, which measures water flow, it may need replacement. The flowmeter should generate the necessary pulse when water passes through its turbine to ensure accurate water flow detection.
  • Ensure that the dishwasher’s drain hose is positioned at the recommended height, which is typically higher than 40cm above the appliance base. This prevents continuous drainage and potential i10 errors caused by improper drainage.
  • If you suspect a faulty pressure sensor or hose obstruction, bending, or leaking, address these issues. Accurate water level readings are crucial, and a well-functioning pressure sensor prevents the i10 error.
  • If all else fails and you continue to encounter the i10 error, it might be due to a faulty main board. In such cases, the only solution is to replace the main board.

Conclusion:

Fixing the Electrolux dishwasher’s i10 fault code is manageable. Just follow our troubleshooting steps to address the issue. Whether it’s a closed water tap, low water pressure, or a faulty part, a little effort can get your dishwasher back in action.

FAQs (Frequently Asked Questions) about the Electrolux dishwasher i10 fault code

The i10 error code signifies a “Water Tap Closed Error.” It appears when the dishwasher encounters issues with water intake at the start of its cycle.

Regularly check and clean the dishwasher’s filter, ensure the water tap is fully open before starting a cycle, and maintain good water pressure in your plumbing system to reduce the likelihood of encountering this i10 or i11 error code.

Leave a Reply